Made for your next build

Your panel.
Your layup.

Configure a flat composite panel, see an instant budget estimate, and send your specification for a confirmed quote.

Design and quote a panel Explore applications

Carbon fiber and fiberglass. Solid laminate or sandwich construction. Not sure what layup you need? Size it from the load.

Inside a sandwich panelSection illustration

Composite skinsLightweight core

Stiffness through separation.
Choose the skin, core, and dimensions below.

Face material 3K carbon twill 5.7 oz epoxy wet layup

Face material E-glass plain weave Compare laminate options

Core options PVC H80 foam 3/8 and 1/2 in stock sheet options

Geometry limits 4-96 in length Flat CNC-trimmed panels

Panel Builder

Configure your panel

Choose a starting point or build your own. Every request is reviewed for material availability, manufacturing details, and final pricing.

Guide me through the panel

Start with size, choose a laminate, then add details. Need help sizing for a load? Use the design tool.

Dimensions & quantity

Length in Width in

Cut profile Quantity

Machining & acceptance

Round holes / panel Common hole diameter (in)

Additional contour / cutout cut length (in per panel)Add the path length of custom profiles and internal cutouts beyond the rectangular perimeter. Round holes are counted separately.

Pan-downs / panel Pan-down pad size (in, square)

A pan-down removes the core locally and ramps the skins together into solid laminate for hardware pads, hinge lines, or load introduction. Sandwich panels only. Locations, sizes, and the ramp are confirmed on the drawing.

Requested profile tolerance Inspection deliverable

Laminate Panel family

Face material Core

Core taper Core thickness at the thin end

A wedge core thins linearly along the length from the selected core to the thin-end thickness, machined from the thicker stock. Thickness is shown as a range; taper direction and datum are confirmed on the drawing.

Plies / skin (half of total for solid laminate) Orientation set

Symmetric layup

Details

Inserts Peel-ply bond surface Cosmetic face

Insert type Thread

Insert count / panelHardware and potting are budget allowances. Tapped holes need solid laminate: a pan-down pad or a solid-laminate panel. Confirm thread, location, and required load with a drawing. Edge treatmentOpen leaves the core exposed on sandwich panels. Solid laminates are open or sealed. Sealed and filled edges include the outer edge and declared internal cut edges; solid edges follow the outer perimeter and declared contours. Test couponsA witness panel is the same laminate laid up in the same batch. Lab testing sends it as coupons to an ISO/IEC 17025 lab for tension, compression, and short-beam strength (6 specimens each, mean and CV). The lab line is an allowance, not a lab quote.

Peel ply is assumed on both faces, or on the opposite face when a cosmetic face is selected.

Requested production window

Application requirements Service category Maximum service temperature (°C)Above 60°C requires a separately reviewed resin and cure process. This is an intake threshold, not a material rating.

Include loads, support spacing, environment, fire requirements, drawing revision, and acceptance criteria in your request. S-glass, aramid, H100 foam, balsa, and honeycomb are quoted on review; mixed-material laminates need a drawing-based quote.

Manufactured-to-order estimate 1 panel

Calculating… Timing needs confirmation

—

Weight: 0 lb
Area: 0 ft²
Thickness: 0 in

Process: -
Confirmation: Materials, tolerances, and timing confirmed after review

Estimate covers: Setup, material, layup, cure, trim, selected details, inspection, packing
Excluded: Shipping, tax, structural analysis, certification, custom tooling

Production windows start after drawing approval and material availability confirmation. Ship dates are confirmed in the issued quote; transit time is additional.

Estimate breakdown

Selling-price allocations for this order, including setup and manufacturing allowances.

Assumptions & estimate basis

Material references checked October 3, 2026. Production capability and final pricing need confirmation.

Compare quantities

Budget pricing for the same design at different quantities
Panels	Each	Order total

Setup is shared. Material sheet purchases and fabrication batches create real cost steps.

View laminate stack

Starting schedule. Woven plies contain two fiber directions; UD plies contain one. Final ply angles and structural suitability require review.

No payment required. This is an estimate, not a production quote.

From specification to a confirmed quote.

Configure

Set your dimensions, materials, and panel details. Compare budget estimates as you go.

Request

Send your configuration with project notes and a drawing link, if you have one.

Confirm

We review availability, geometry, and requirements, then reply with a confirmed quote.